Back to the CNC program

Free tool

Laser box generator

Enter the size and material thickness, check the drawing and download a .tap file for our CNC program or an SVG for any other program. The parts have finger joints that slot into each other. Everything is calculated in your browser: no account, nothing is stored on the server.

Open the .tap in our CNC program and run it straight away. The SVG is for other programs; ours opens it too, with one extra step (drawing width).

Before you cut

Try thin material first

For a box the laser has to cut through the material, not just engrave: more passes and a slower feed. Cut your first box from cardboard or 3 mm plywood and check that the parts fit.

Check the file on the simulator

Open the .tap in our CNC program and run it on the simulator before the real cut. The drawing shows whether parts overlap and whether the size is right.

Kerf and thickness

The laser burns away a thin strip of material. The generator enlarges parts and shrinks holes by half of that width, so the joints hold without glue. If the joints are loose, increase the kerf by 0.05 mm; if they do not go together, reduce it. Measure the thickness with a caliper: 3 mm plywood is often anywhere from 2.8 to 3.2 mm. The quickest way to find it is the “Kerf test comb”.

What is in the .tap file

Millimetres (G21), absolute coordinates (G90), only G0 and G1, no laser power and no Z: the program sends the power, so the file opens without conversion. Holes and inner contours are cut before the outer one, so a part does not drop out before it is finished. Each contour is cut with all passes at once, or, if you choose, the whole drawing once per pass. Each sheet is a separate file with its bottom left corner at 0,0.

Lasers are dangerous. Wear safety glasses for your laser's wavelength, keep a fire extinguisher within reach and work with fume extraction. "Emergency stop" in the program does not replace a physical emergency stop switch on the machine. The program is free and you use it at your own risk.